• Enhanced adhesion to wide variety of substrates
• Provides even coating with superior scratch resistance
• Efficient EMI/RFI screening coating with excellent attenuation levels
• Fast drying at room temperature
• Prevents static build-up
• For professional use only

• Excellent surface resistivity (0.3-0.7 ohm  per sq. at 50 microns)
• Enhanced adhesion to wide variety of substrates including ABS, and many other plastics, with superior scratch resistance   (Pencil Hardness 9H)
• Excellent attenuation levels
• Specially formulated to avoid problems of settlement, therefore providing even surface coating
• Fast drying at room temperature
• Coats complex shapes
• Prevents static build-up

• A high purity solvent blend designed for use with Electrolube Nickel Screening Compound Plus.
• Primary use of NSCPT is to dilute the coating for use in dip and spray applications
• RoHS compliant (2002/95/EC)

• Offers excellent adhesion to all substrates
• UV trace for inspection
• May be removed with solvents such as Ultrasolve (ULS)
• Wide temperature range and good dielectric properties
• May be soldered through, allowing for repair
• For professional use only
  

Product options
APL15ML 12x15ml
APL400H 12x400ml
APL500ML 6x500ml
APL05L 1x5L

• Very low VOC conformal coating
• Excellent solvent, humidity and mould resistance
• UV trace for inspection
• Clear colour

• Ideal for protecting ferrous metals from corrosion
• Good resistance to humidity
• Resolderability through the lacquer and for use as a flux

• Thin film coating offering excellent moisture resistance
• Assemblies can be coated without masking
• Applies a very thin film which breaks when connectors, etc are inserted
• Contains UV trace for easy inspection

• Resistant to mould growth
• May be removed with solvents such as Ultrasolve (ULS)
• UV trace for inspection
• Excellent dielectric properties and with a wide temperature range
• Approved to US MIL-1-46058C
  
• China Military Approval GJB150 and GJB4 (Naval)
• For professional use only

• Used to dilute non-acrylic conformal coatings for use in dipping and spraying applications
• Normal thinning ratio for spraying applications is 2 parts coating to 1 part thinner

• Flexible latex for masking components
• Completely hand-peelable, leaving no residue
• Solvent resistant and non-contaminating to conformal coatings
• Dries at room temperature
• High film strength, does not break easily

• Flexible synthetic acrylic latex with good solvent resistance making it suitable for masking components, connectors and other items during a conformal coating process
• PCS ensures that sensitive items and areas requiring further proc­essing are not coated
• Thermal Cure
• Completely hand-peelable, leaves no residue.
• Ammonia free
• Does not dissolve in solvents, does not contaminate conformal coating.
• Ammonia free
• Suitable for use with dip, spray or brush applied conformal coatings.
• Can also be used as a solder mask.

PCS250 (12 x 250ml)

• Excellent resistance to humidity and mould
• UV trace for inspection
• Clear
• Also available in an aerosol

• The main uses of the thinners is to dilute the coatings for use in dip and spray coating
• PTH may be used to maintain the viscosity of Electrolube PUC polyurethane coating in open tanks used in dip coating processes
• PTH is a flammable solvent blend and should be used in a well ventilated area and all sources of ignition must be avoided

• UL approved
• Resistant to common solvents
• May be soldered through for rework

• Used to locally encapsulate high impedence/high voltage points
• Use with a syringe to form a fillet of the gel around components

• Red version (DCR) available for camouflage
• Resistant to common solvents
• May be soldered through for rework

• Specifically formulated for the removal of Electrolube's cured silicone and water based coatings
• Can be used for the removal of local areas of coating before repair

• Used to dilute non-acrylic conformal coatings for use in dipping and spraying applications
• Normal thinning ratio for spraying applications is 2 parts coating to 1 part thinner

• Flexible, transparent, fast drying modified silicone conformal coating specifically designed for the protection of electronic circuitry processed with lead free soldering products.
• Compatible with lead free flux residues
• Fluoresces under UV light for ease of inspection.
• Excellent operating temperature range.
• Can be soldered through.
• Non-corrosive to Cadmium and Zinc plate (contains no phenols).
• Excellent resistance to mould growth
• UV light
• Excellent dielectric properties at all frequencies in accordance to DEF-STAN 59-4/2 Annex C

• Water based conformal coating, based on polymeric materials which has been specifically formulated for the protection of electronic circuitry.
• Environmentally friendly and eliminates hazards associated with solvent based conformal coatings
• NMP (N-Methyl pyrrolidone) free.
• Fluoresces under UV light for ease of inspection.
• Wide operating temperature range.
• Excellent adhesion on a wide variety of substrates.
• Can be soldered through without fear of highly toxic gases being produced (contains no isocyanates).
• Non-corrosive to Cadmium and Zinc plate (contains no phenols).
• Cured coating can be removed with Electrolube Remover Gel (DRG).
• Excellent Dielectric properties and resistant to mould growth.
• Excellent solvent resistance.
• Very low VOC content

• Fast drying and is designed to protect printed circuit boards, particularly those exposed to high humidity environments
• Based on a high quality silicone resin, FSC exhibits excellent adhesion to a wide variety of substrates and operates within a wide temperature range
• Fluoresces under UV light for ease of inspection
• Wide operating temperature range and resistant to mould growth
• Can be soldered through without fear of highly toxic gases being produced (contains no isocyan­ates)
• Non-corrosive to Cadmium and Zinc plate (contains no phenols).
• Cured coating can be removed with Electrolube Ultrasolve (ULS)
• Excellent Dielectric properties

Product options:
FSC400 (12 x 400ml)
FSC05L  (1x 5 Ltr)