Automotive Sensors

Electrolube Conformal Coatings, Potting Compounds, Thermal management solutions and other associated product solutions for all areas of the Automotive Electronics industry.
  • Diesel / Fuel Resistant
  • Corrosive Gas Resistant
  • Salt Mist / Water Resistant
  • Oil Resistant
  • RF Friendly
  • Stress Gauges

The modern vehicle has as many sensors on than a cold war jet fighter, monitoring everything from the obvious (eg. tyre pressures), to the things most drivers wouldn’t even consider (running speed of the engine). These sensors are exposed to a wide array of different conditions including some of the most hostile conditions (fuel sensors). It takes then, specialist materials in order to protect the device and maintain optimum operation. Electrolube has the bespoke solution for you.

More info >

Electrolube have an extensive range of products suitable for all automotive application environments, we have collated a selection of products in a specialist brochure to aid your selection which can be viewed here:

Electrolube also have a number of articles and blogs which you may find useful in selecting the right material for your application

Read more about specific products for the Automotive market:



Automotive Electronics

Automotive Sensors

UVCL - UV Cure Conformal Coating

UV Cure Conformal Coating

4 Litres

Product code: UVCL04LE

UVCL is a low viscosity, single-part conformal coating, which cures within seconds of exposure to the correct dose of UV light. It has been specifically designed to offer the highest level of protection for PCBs and can be applied using selective spray equipment. UVCL is the next generation of VOC-free conformal coatings. For full product details including test results please refer to the TDS below. If you still require further information please don't hesitate to get in touch.

Key Properties:
  • Single component conformal coating, which cures upon exposure to UV light
  • Designed to offer the highest level of protection for electronic circuitry
  • Exceptionally high speeds of application and cure
  • Low viscosity; ready to use for selective spray application
  • Dual cure; secondary moisture cure mechanism for complete cure even in shadow areas
  • VOC-free and non-flammable
  • Long shelf life
  • Excellent electrical properties
  • Wide operating temperature range
  • Fluoresces under UV light for ease of inspection
  • RoHS Compliant
  • IPC-CC-830
  • IEC-61086
  • UL746-QMJU2

Product data sheets
UVCL (tds) Download

Log into our MSDS database for Safety Data Sheets: MSDS