Electronic and General Purpose Cleaning

Wash away the worry of contaminants

An Electrolube brand cleaning product next to a conical flask filled with liquid
  • Flux Removal
  • Metal Degreasing
  • Flammable & Non-flammable
  • Bulk & Aerosol
  • Water & Solvent Based

Cleaning is an essential process within electronics manufacture and has been used for many years to remove potentially harmful contaminants during PCB manufacture.

Such contaminants include flux, solder and adhesive residues, and other more general contaminants such as dust and debris present from other manufacturing processes.

More info > Download product selector chart > Download product brochure >

The purpose of cleaning, specifically within the rapidly expanding electronics industry, is to essentially improve product lifetime by ensuring good surface resistance and by preventing current leakage leading to PCB failure. This developing market sees modern and future electronics becoming smaller and smaller and the requirement for high performance and reliability is stronger than ever. In order to achieve good insulation resistance and ensure adequate adhesion of conformal coatings and encapsulation resins, the cleanliness of the electronic assemblies is essential.

There are many stages where cleaning is required; prior to stencilling and soldering in order to remove contaminants from the many previous production stages, after stencilling to remove excess solder paste/adhesive and after soldering to remove corrosive flux residues and any solder balls.

In industry today, many manufacturers are turning to ‘no clean’ processes, implying that cleaning is not required after soldering. In the ‘no clean’ process the solids content of the flux is lower than traditional types, however they still contain rosin and activator. Such residues, along with any other unwanted elements collected due to the missing cleaning stage, could cause issues with adhesion and possibly affect the performance of the protecting media applied, ie. Encapsulation Resins or Conformal Coating. It can therefore be stated that even with advances in new technologies, such as ‘no clean’ fluxes, cleaning is still an essential multi-stage process within the electronics industry.

Finally, there are also cleaning stages required for the removal of coatings and adhesives when re-work is necessary, for the cleaning of individual components and for maintenance of the production line.



CCL - Non-Flammable Contact Cleaner

Non-Flammable Contact Cleaner


Product code: CCL200

CCL is a non-flammable solvent cleaner which has been specially developed for the efficient cleaning of electrical contacts and switches. Due to the fast evaporation of the solvent and non-flammable nature, CCL may be used on live equipment if required and comes with a brush for ease of use.

CCL is designed specifically as an electrical contact cleaner to loosen and remove the build-up of grease, oxides and other deposits at the contact point between two electrical components such as switches.

It is 100% Ozone Friendly, non-flammable and evaporates quickly, leaving no residue. The low surface tension means that it has exceptional penetrating power.

Key Properties:
  • Very fast evaporation time;
  • Loosens and removes deposits
  • Low hazard product;
  • Non-flammable
  • Safe with most plastics and rubbers

Product data sheets
CCL (tds) Download

Log into our MSDS database for Safety Data Sheets: MSDS

Additional Info

How to clean electrical contacts