Maintenance & Service Aids

A total solution for maintenance, repair and overhaul

Electrolube FRE freezer spray being used on a PCB
  • Syringes, pump sprays, tubes, aerosols, wipes, and pens
  • Air duster and freezer sprays
  • Cleaners and wipes
  • Greases and oils
  • Encapsulation resins and conformal coatings
  • Maintenance, test, repair and small scale production
  • Paints and galvanising sprays

Electrolube manufactures a wide range of maintenance products to complement the major product groups. Whether used by OEMs or subcontractors, these products are supplied in convenient packaging, covering a wide range of applications and requirements.

More info > Download product selector chart > Download product brochure >

Specific products in this range include:

  • Airdusters – For the removal of dust and dirt from hard to reach places, for example, in photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying.
  • Freezer Sprays – For the identification of faulty components by rapidly cooling components to -55°C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components.
  • General Maintenance – Including hard surface cleaners, cyanoacrylate adhesives, tamper evident seals and contact cleaner lubricants.
  • Industrial Maintenance – Including high quality paints, galvanising sprays, polyurethane foam, lubricants and graffiti removers.

Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available. Products are supplied in a range of packaging dependent upon their application and end use. These include aerosols, pump sprays, syringes, tubes, pens, sachets and small tins.

Maintenance & Service Aids

Lubricants and Grease

DFL - Dry Film Lubricant

DFL
Dry Film Lubricant

200ml

Product code: DFL200D


DFL is a white, dry-film lubricant, for use where mineral oils or silicones are not suitable. It is also suitable for use as an anti-stick and mould release agent or where products of the highest purity are required. The film will not contaminate, migrate or pick up dust and dirt particles.


Key Properties:
  • High purity PTFE based lubricant
  • Water repellent with a low co-efficient of friction
  • May be used where silicones or mineral oils are unsuitable
  • Can be used as a cold mould release

Product data sheets
DFL (tds) Download
044DFL (msds) Download