Maintenance & Service Aids

A total solution for maintenance, repair and overhaul

Electrolube FRE freezer spray being used on a PCB
  • Syringes, pump sprays, tubes, aerosols, wipes, and pens
  • Air duster and freezer sprays
  • Cleaners and wipes
  • Greases and oils
  • Encapsulation resins and conformal coatings
  • Maintenance, test, repair and small scale production
  • Paints and galvanising sprays

Electrolube manufactures a wide range of maintenance products to complement the major product groups. Whether used by OEMs or subcontractors, these products are supplied in convenient packaging, covering a wide range of applications and requirements.

More info > Download product selector chart > Download product brochure >

Specific products in this range include:

  • Airdusters – For the removal of dust and dirt from hard to reach places, for example, in photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying.
  • Freezer Sprays – For the identification of faulty components by rapidly cooling components to -55°C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components.
  • General Maintenance – Including hard surface cleaners, cyanoacrylate adhesives, tamper evident seals and contact cleaner lubricants.
  • Industrial Maintenance – Including high quality paints, galvanising sprays, polyurethane foam, lubricants and graffiti removers.

Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available. Products are supplied in a range of packaging dependent upon their application and end use. These include aerosols, pump sprays, syringes, tubes, pens, sachets and small tins.

Maintenance & Service Aids

Airdusters

EADI200 - Non-Flammable Air Duster

EADI200
Non-Flammable Air Duster

200ml

Product code: EADI200D


Electrolube's EADI Air Duster is a compressed gas aerosol designed for the safe removal of dust and airborne contamination from very delicate or inaccessible areas of electrical and electronic equipment. While EADI is non-flammable, we would always recommend powering down machinery before use. EADI can be used at any angle for all those harder to reach areas and comes with a straw to further extend your reach or help you focus in on specific areas.

For more stubborn debris needing a more powerful blast, please refer to EADI Plus (EADPI)


Key Properties:
  • Invertible (may be used upside-down/any angle)
  • Inert, pure compressed gas for dust/debris removal
  • Non-Flammable
  • Use short-sharp blasts

Product data sheets
EAD-EADI (tds) Download

Log into our MSDS database for Safety Data Sheets: MSDS