Maintenance & Service Aids

A total solution for maintenance, repair and overhaul

Electrolube FRE freezer spray being used on a PCB
  • Syringes, pump sprays, tubes, aerosols, wipes, and pens
  • Air duster and freezer sprays
  • Cleaners and wipes
  • Greases and oils
  • Encapsulation resins and conformal coatings
  • Maintenance, test, repair and small scale production
  • Paints and galvanising sprays

Electrolube manufactures a wide range of maintenance products to complement the major product groups. Whether used by OEMs or subcontractors, these products are supplied in convenient packaging, covering a wide range of applications and requirements.

More info > Download product selector chart > Download product brochure >

Specific products in this range include:

  • Airdusters – For the removal of dust and dirt from hard to reach places, for example, in photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying.
  • Freezer Sprays – For the identification of faulty components by rapidly cooling components to -55°C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components.
  • General Maintenance – Including hard surface cleaners, cyanoacrylate adhesives, tamper evident seals and contact cleaner lubricants.
  • Industrial Maintenance – Including high quality paints, galvanising sprays, polyurethane foam, lubricants and graffiti removers.

Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available. Products are supplied in a range of packaging dependent upon their application and end use. These include aerosols, pump sprays, syringes, tubes, pens, sachets and small tins.

Maintenance & Service Aids

Airdusters

EADPI - Invertible Air Duster Plus

EADPI
Invertible Air Duster Plus

200ml

Product code: EADPI200D


Electrolube's EADP is a high powered compressed gas 'Air Duster' designed for the safe removal of stubborn dust and airborne contamination from delicate or inaccessible areas of electrical and electronic equipment. While EADP is non-flammable, we would always recommend powering down machinery before use. EADP can be used at angles up to 60°, for harder to reach areas please refer to EADPI which is invertible and can be used at any angle including 'upside down'.


Key Properties:
  • High-Powered
  • Invertible (Can at any angle / upside down)
  • Inert, pure compressed gas for dust/debris removal
  • Non-Flammable
  • Use short-sharp blasts

Product data sheets
EADP-EADPI (tds) Download

Log into our MSDS database for Safety Data Sheets: MSDS