Maintenance & Service Aids

A total solution for maintenance, repair and overhaul

Electrolube FRE freezer spray being used on a PCB
  • Syringes, pump sprays, tubes, aerosols, wipes, and pens
  • Air duster and freezer sprays
  • Cleaners and wipes
  • Greases and oils
  • Encapsulation resins and conformal coatings
  • Maintenance, test, repair and small scale production
  • Paints and galvanising sprays

Electrolube manufactures a wide range of maintenance products to complement the major product groups. Whether used by OEMs or subcontractors, these products are supplied in convenient packaging, covering a wide range of applications and requirements.

More info > Download product selector chart > Download product brochure >

Specific products in this range include:

  • Airdusters – For the removal of dust and dirt from hard to reach places, for example, in photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying.
  • Freezer Sprays – For the identification of faulty components by rapidly cooling components to -55°C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components.
  • General Maintenance – Including hard surface cleaners, cyanoacrylate adhesives, tamper evident seals and contact cleaner lubricants.
  • Industrial Maintenance – Including high quality paints, galvanising sprays, polyurethane foam, lubricants and graffiti removers.

Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available. Products are supplied in a range of packaging dependent upon their application and end use. These include aerosols, pump sprays, syringes, tubes, pens, sachets and small tins.

Maintenance & Service Aids

Paints and Paint Removers

SCPH - Silver Conductive Adhesive

SCPH
Silver Conductive Adhesive

10ml Syringe

Product code: SCPH10S


SCPH has been designed for use during the manufacture of display modules for mobile/smart phones, tablets and many other electronic products. It exhibits excellent electrical conductivity and good adhesion to a vast array of substrates, including those critical to the LCD and LCM markets.


Key Properties:
  • Excellent electrical conductivity; passes the RA test (1000hours, 85°C and 85% RH)
  • Fast curing; suitable for application via high speed automatic dispenser
  • Good adhesion to ITO and CF substrates; ideal for the manufacture of display modules
  • Non-halogen and Sb free; can be stored under standard ambient conditions

Not Available in Europe - Limited availability to the rest of the word, please check with your local office


Product data sheets
SCPH (tds) Download