Maintenance & Service Aids

A total solution for maintenance, repair and overhaul

Electrolube FRE freezer spray being used on a PCB
  • Syringes, pump sprays, tubes, aerosols, wipes, and pens
  • Air duster and freezer sprays
  • Cleaners and wipes
  • Greases and oils
  • Encapsulation resins and conformal coatings
  • Maintenance, test, repair and small scale production
  • Paints and galvanising sprays

Electrolube manufactures a wide range of maintenance products to complement the major product groups. Whether used by OEMs or subcontractors, these products are supplied in convenient packaging, covering a wide range of applications and requirements.

More info > Download product selector chart > Download product brochure >

Specific products in this range include:

  • Airdusters – For the removal of dust and dirt from hard to reach places, for example, in photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying.
  • Freezer Sprays – For the identification of faulty components by rapidly cooling components to -55°C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components.
  • General Maintenance – Including hard surface cleaners, cyanoacrylate adhesives, tamper evident seals and contact cleaner lubricants.
  • Industrial Maintenance – Including high quality paints, galvanising sprays, polyurethane foam, lubricants and graffiti removers.

Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available. Products are supplied in a range of packaging dependent upon their application and end use. These include aerosols, pump sprays, syringes, tubes, pens, sachets and small tins.

Maintenance & Service Aids

General Maintenance

SGL - Silica Gel

Silica Gel

10g - 50g - 100g

Product code: SGL10G - SGL50G - SGL100G

Electrolube produce Silica Gel in 3 handy sizes; 10 g, 50 g and 100g sachets. The silica gel contained in the porous sachets is non indicating, i.e. it does not change colour when it has absorbed the maximum moisture. The silica gel used in SGL conforms to BS2540:1991

Key Properties:
  • Ideal for protecting assemblies from moisture ingress
  • Non-indicating
  • Inert to most non-aqueous chemicals
  • Available in 10g, 50g and 100g sachets

Product data sheets
SGL (tds) Download
044-SGL-SDS11169 (msds) Download