Maintenance & Service Aids

A total solution for maintenance, repair and overhaul

Electrolube FRE freezer spray being used on a PCB
  • Syringes, pump sprays, tubes, aerosols, wipes, and pens
  • Air duster and freezer sprays
  • Cleaners and wipes
  • Greases and oils
  • Encapsulation resins and conformal coatings
  • Maintenance, test, repair and small scale production
  • Paints and galvanising sprays

Electrolube manufactures a wide range of maintenance products to complement the major product groups. Whether used by OEMs or subcontractors, these products are supplied in convenient packaging, covering a wide range of applications and requirements.

More info > Download product selector chart > Download product brochure >

Specific products in this range include:

  • Airdusters – For the removal of dust and dirt from hard to reach places, for example, in photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying.
  • Freezer Sprays – For the identification of faulty components by rapidly cooling components to -55°C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components.
  • General Maintenance – Including hard surface cleaners, cyanoacrylate adhesives, tamper evident seals and contact cleaner lubricants.
  • Industrial Maintenance – Including high quality paints, galvanising sprays, polyurethane foam, lubricants and graffiti removers.

Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available. Products are supplied in a range of packaging dependent upon their application and end use. These include aerosols, pump sprays, syringes, tubes, pens, sachets and small tins.

Maintenance & Service Aids

Prototype and Repair

SMF/SMFL - Surface Mount Rework Flux

SMF/SMFL
Surface Mount Rework Flux

12ml Pen - 200ml

Product code: SMF12P - SMFL200D


Electrolube Surface Mount Rework Flux is a quick drying, mildly activated (RMA type) no-clean flux in aerosol form for use when removing and replacing surface mount components. The aerosol is fitted with a wide angle actuator to give a protective film and an extension tube actuator for pinpoint application. Particularly recommended for precision products e.g. telecommunications or professional computers where a high degree of reliability is required.


Key Properties:
  • Quick drying, mildly activated (RMA type) no-clean flux
  • For use with hot air, hot gas or conventional soldering techniques
  • Zero halide content so no cleaning is required
  • Supplied in pen (SMF) and aerosol (SMFL) form

Product data sheets
SMFL-SMF (tds) Download
044-SMF-SDS10561 (msds) Download
044-SMFL-SDS10562 (msds) Download