Encapsulation Resins

Meeting the challenge of challenging environments

Electrolube resins in use.
  • UL approved
  • Potting / encapsulating
  • Sealing and protection
  • Cable jointing
  • Coloured and optically clear
  • Bespoke and ex-stock

Resin systems are designed to protect and insulate printed circuit boards (PCBs) and electronic components from the threats of harsh and challenging environments, including; moisture, vibration, thermal or physical shock and general contamination. By encapsulating the entire device, resins can form a complete barrier against such environments offering superior performance under extreme conditions.

More info > Download product selector chart > Download product brochure >

Potting and encapsulation resins also offer excellent mechanical protection. Mechanical protection can be identified in a number of ways; superior performance is evident in applications involving prolonged exposure or immersion in harsh chemicals, or those exposed to vibrational, thermal or physical shock, for example. The higher level of protection is achieved through the mass of the resin surrounding the unit. This is different for every application however potting and encapsulating resins always provide a far more substantial covering than thatoffered by conformal coatings.

Due to the bulk of material surrounding the PCB, potting and encapsulation resins are commonly two-part systems which when mixed together form a solid, fully cured material, with no by-products. In cases where the conditions are not considered extreme, Electrolube offer a range of conformal coatings which provide a combination of protection in humid and corrosive environments with ease of application. They can be used for complete coverage or selective application onto the PCB, thus minimising the weight added as a result of applying a protective material.


Example of Mixing instructions for Encapsulation Resins


More Information

Encapsulation Resins

Epoxy

ER2074 - Thermally Conductive, Flame Retardant Epoxy Resin

ER2074
Thermally Conductive, Flame Retardant Epoxy Resin

250G - 1K - 5K - 10K

Product code: ER2074RP250G - ER2074K1K - ER2074K5K - ER2074K10K


ER2074 is a flame retardant system two component epoxy resin with UL94 V-0 approval. The flame retardant technology used is halogen free leading to relatively low toxicity fumes and low smoke emission and the lack of abrasive fillers means that there is lower wear on dispensing machinery.

The resin is thermally conductive, with a conductivity value of 1.26W/m.K, while offering good chemical and water resistance.

Once cured, the white colour gives a good aesthetic finish, and the high thermal conductivity means it has been very effective as part of thermal management solutions in LED applications, for both external and internal lighting systems.


Key Properties:
  • Two part white epoxy resin
  • High thermal conductivity; 1.26W/m.K
  • Good environmental protection
  • Good Water resistance
  • Chemical resistant
  • Does not contain abrasive fillers; low wear on dispensing machinery
  • Meets UL94 V-0 approval
  • RoHS Compliant

Product data sheets
ER2074 (tds) Download

Log into our MSDS database for Safety Data Sheets: MSDS