Encapsulation Resins

Meeting the challenge of challenging environments

Electrolube resins in use.
  • UL approved
  • Potting / encapsulating
  • Sealing and protection
  • Cable jointing
  • Coloured and optically clear
  • Bespoke and ex-stock

Resin systems are designed to protect and insulate printed circuit boards (PCBs) and electronic components from the threats of harsh and challenging environments, including; moisture, vibration, thermal or physical shock and general contamination. By encapsulating the entire device, resins can form a complete barrier against such environments offering superior performance under extreme conditions.

More info > Download product selector chart > Download product brochure >

Potting and encapsulation resins also offer excellent mechanical protection. Mechanical protection can be identified in a number of ways; superior performance is evident in applications involving prolonged exposure or immersion in harsh chemicals, or those exposed to vibrational, thermal or physical shock, for example. The higher level of protection is achieved through the mass of the resin surrounding the unit. This is different for every application however potting and encapsulating resins always provide a far more substantial covering than thatoffered by conformal coatings.

Due to the bulk of material surrounding the PCB, potting and encapsulation resins are commonly two-part systems which when mixed together form a solid, fully cured material, with no by-products. In cases where the conditions are not considered extreme, Electrolube offer a range of conformal coatings which provide a combination of protection in humid and corrosive environments with ease of application. They can be used for complete coverage or selective application onto the PCB, thus minimising the weight added as a result of applying a protective material.


Example of Mixing instructions for Encapsulation Resins


More Information

Encapsulation Resins

Resins Cleaners

RST - Resin Stop

RST
Resin Stop

250ml

Product code: RST250


Resin Stop has been formulated using fluoropolymer technology to provide a film that, once applied to the substrate, prevents most epoxy and polyurethane resins adhering. This makes the product ideally suited for coating machinery, jigs, moulds and many other substrates likely to come into contact with resin such as, aluminum, stainless steel, glass and numerous plastics, once the resin has fully cured it can then simply be peeled off.


Key Properties:
  • Provides a non-stick coating, excellent for jigs, etc.
  • Silicone free
  • Dry film - eliminates unwanted transfer
  • Reduces the frequency to clean mould tools etc.

Product data sheets
RST (tds) Download
044RST (msds) Download