Thermal Management Products for LEDs

The thermal management of the LED and the unit is a vitally important consideration for the reliability of an LED unit.
  • Thermal Pastes
  • Phase Change Material
  • Gap Pads
  • Thermal Bonding
  • RTVs
  • Encapsulation Resins

The thermal management of the LED and the unit is a vitally important consideration for the reliability of an LED unit. A variation of just one single degree centigrade can effect both the life of the LED, (the higher the temperature the unit is running at the faster the luminaire degrades) as well as the efficiency, ( the lower the temperature, the more efficient the luminaire is at producing light).

More info >

With a single degree centigrade of heat having such a large effect on the efficiency and the lifetime of an LED Luminaire, the thermal interface material chosen for the LED design is of vital importance.

Electrolube offer a wide range of thermal interface materials including curing and non-curing pastes, gap pads, phase change materials (facilitating easy rework), as well as a selection of encapsulation resins which are designed to dissipate the heat away from the components to the housing.

If you have any questions our dedicated technical support team are on hand to answer your questions and don’t forget that our LED brochure contains vast amount of collaborative test data from Bridgelux comparing data to help you select the right material.

If you would like to read in more detail about the effects of effective thermal management on LED units, we have several articles you may be interested in:

LED Industry

Thermal Management of LEDs

ER4001 - White Epoxy Resin

ER4001
White Epoxy Resin

250g - 25kg

Product code: ER4001RP250G - ER4001K25K


ER4001 is a thermally conductive epoxy resin system which is highly temperature resistant, providing full protection up to 150°C. Thanks to its enhanced thermal conductivity; ER4001 is ideal for those applications that require effective heat dissipation, particularly for units with limited spacing.

Completely free from abrasive fillers, this product will have minimal wear impact on dispensing equipment.


Key Properties:
  • Excellent high temperature resistance
  • Enhanced thermal conductivity
  • Moderate viscosity for a filled system; provides thermal dissipation for units with limited spacing
  • Does not contain abrasive fillers; low wear on dispensing machinery
  • RoHS Compliant

Product data sheets
ER4001 (tds) Download

Log into our MSDS database for Safety Data Sheets: MSDS